This planter gave my front steps the perfect amount of "oomph" it needed. Not only does it allow me to display a variety of beautiful flowers at the same time, but.

How to Make a DIY Silicone Mould. This is a really easy and fast way of making a silicone mold. You can quickly take casts of anything hard and durable and remove it when the silicone is set after about 2. Then your mold is ready to go! NOTE: I’m working on a variation of this How to make a DIY silicone mould tutorial that is food safe and you can use for chocolates and cakes etc. If you’re interested in being the first to find out about that then sign up to our mailing list or follow us on social. But we’re back with probably one of my favourite tutorials that has so much potential.

This DIY is something I’ve been working on for ages! Being able to quickly and easily make a mould means I can make clay, resin and concrete (to name a few) versions of pretty much anything I like. The idea originally came from this post, which was awesome but I found it a was lacking a few key details so I recreated it here. I tried several different materials, techniques and combinations so some of the details in the pictures may change – so read through carefully! Materials: – Silicone Sealant – So this is important. It has to say silicone on it!

I tried with different sealants and some worked. The one in the picture below worked ok, but the best I tried was a “bathroom silicone sealant” which produced the final mould.– Caulking gun – to get the silicone out.– Hand soap– A positive to make the mould out of– Bowl or bucket that isn’t used for food (because you’re not going to want to eat of of it again!)Instructions: 1. Mix your soap and water together. I’ve done it roughly about 1 part soap to 1. Whoa! We’ve changed soap colour here. This tutorial took a few times to get right, so we now have purple soap for the rest of the DIY. Like magic! 2. Cut the end off the silicone and without using the nozzle squeeze it all out using the calking gun.

If you’re making a small mould you can just use a little and save the rest for another time. Work the silicone until it is not sticky. I used both my hands to pull and squeeze the silicone whilst it was submerged in the water for about 5 minutes. Keeping it wet transfer into a container. This step was not in the original tutorial but as the silicone drys it gets very sticky so you want it somewhere it won’t make a huge mess! The soapy water keeps stops it from sticking to your hands so don’t dry them yet either. Press your object into the silicone to create the mould. Cilla Black Show Us Your Crack Kills.

You’ll want something with smooth edges that the silicone will peal off easily. This resin bracelet was perfect. Leave the object in your resin until the mould is firm. This doesn’t take very long.

Mine was set in just a couple of hours! Carefully peel the object out of the mould and the mould out of the container (so you can use it again!)You might be wondering why I needed to make a silicone mould of a bracelet that I just made from a mould I already have. Silicone moulds are ace for different materials and I needed something more flexible for a very special tutorial I’ll be able to share really soon with you! In the mean time I’ll probably be making moulds of everything I can think of, so expect to see more of this!

Click through below and follow Fall For DIY to get loads more DIY’s and tutorials like this one!

Discount Sealants, Caulks and Adhesives, Adhesive Sealants, NP1, SL1, Expansion Joint Sealants, Backer Rod, RV sealants, Glass Sealants, Deck and pool Sealants. It is a high performance, one component silicone formulated for aquarium construction application. Its fast curing feature provides an excellent glazing for aquarium. This is a really easy and fast way of making a silicone mould. You can quickly take casts of anything hard and durable and turn it into a mold! How to Get Rid of Mice in the House: 4 Ways of Destruction, 5 Ways of Prevention. A few years ago, we bought a bird bath on clearance at the end of the season. We brought it home, set it up, and within a week, it had fallen over and broken into. Job Interview Practice Test Why Do You Want This Job? Answer this job interview question to determine if you are prepared for a successful job interview.

Ask Us Your Paint- Related Questions. C Media Pci Audio Driver Windows 7 64 Bit there. Have a coatings- related question? Check our FAQ page or ask us in the comments section below and we’ll give you an answer within 3 working days (if not sooner).

There could be a number of issues going on, but most likely, the sealant hasn't had enough time to cure. The tube says 48 hours, but that's in ideal conditions.

Ask a question now. Free Colour Consulting / Advice. The Plascon Spaces Showroom offers a free colour consulting service. Colour consulting is a very specialist skill and requires input from yourself to ensure we are able to deliver on your expectations and brief. We therefore require the following from you for our team to work on your project: Please complete the attached questionnaire and return it to us along with high resolution JPG images (maximum 5. MB per image per e- mail) of your interior or exterior. Two or three good photos are sufficient.

Your images can also be sent to this e- mail address along with the completed questionnaire. Guide: . We have bought a wooden cot and would like to refurnish it.

In your professional opinion, what would be the correct white wooden paint to use that is VOC free and nontoxic and won’t chip etc. However I understand the word refurbish to mean, starting from scratch. I suggest the following: Remove all unwanted paint / varnish with water based Remov. All All Purpose Paint Remover.

Allow the remover to work through the coating film, as it is waterbased the time period for effective removal is longer than that of a solvent based stripper. This product is environmentally friendly, biodegradable and easy on skin. I would advise if prolonged use is expected to wear household gloves, we do not know each customers skin allergies. To remove lifted paint and remover use a scraper where possible or a clean cloth which can be rinsed in water. Ensure that there are no traces of remover left on surface. Wipe entire cot down with a solution of sugar soap and allow to dry thoroughly. Sand lightly and remove excess dust with a clean dry cloth.

For longevity of cot and topcoat I recommend the use of Plascon Wood Primer, an oil based product which would need between 1. This will feed the wooden cot and prevent premature cracking and splitting. Velvaglo can be applied directly onto the wood primer as it has a “built in undercoat”. The white Velvaglo is low VOC and low odour. None of our products contain lead including Velvaglo.

Two coats will suffice and the product is chip resistant. The product has a gel structure and does not drip, perfect for this type of item for application purposes. Waterbased enamel can also be used, if a waterbased topcoat is preferred. However if this product is used a Universal Undercoat will need to be applied between the wood primer and topcoat. It is not a gel structure and careful application would be necessary. NB: Using Plascon Waterbased Enamel on cots is recommended for babies that tend to bite the sides of the cot. This forms part of Plascon’s Specialist range and is available in white but can be tinted.

It can be found in most paint and hardware stores.< back to the top. Q: I would like to paint my kitchen cupboards.

I saw on your website that I could use Velvaglo satin sheen. Would this be ok for “knotty pine” cupboards? They were previously varnished (very light). I am looking for a dark colour, perhaps your Chestnut filly R4- D1- 1?

A: Kindly note that you first have to sand the existing varnish back to a smooth matt finish, dust off, and apply one coat of the Plascon Universal Undercoat (UC). Allow this 1. 6 hours to dry and finish with two topcoats of Plascon Velvaglo, with 1. Q: What do I use to remove wallpaper? A: As Plascon does not have a product that is dedicated to wallpaper removal, please consult with the wallpaper manufacturer regarding removal.< back to the top. Q: I have used Suede Paint but had it tinted too dark (almost black). Can one paint over it to lighten the colour?

A: The good news is: yes, you can repaint the wall with a lighter colour in the Suede range. You will unfortunately have to sand the current coating back to a smooth finish and remove all traces of dust. Then apply one coat of universal undercoat; this will ensure the lighter colour will hide the current dark colour. Allow this to dry for 1. Suede undercoat.< back to the top. Q: Should I paint first or tile first?

I want to avoid getting any paint on new tiles and grouting. A: When deciding to tile first or paint first, this will depend on personal preference. Our advice would be to tile first and allow the tile cement and grouting to completely cure. Then cover the tiles with drop- sheets and masking tape before painting. It would be much easier to cover a floor when painting than to cover walls while doing the tile work.< back to the top.

Q: I would like to know if kitchen tiles can be coated with Plascon paints. If they can, which products should you use?

A: Please note that Plascon Kitchens & Bathrooms paint is suitable for wall tiles. However, we do not recommend that floor tiles be painted with DIY products. If you are wanting to paint wall tiles, you first need to prime the tiles with Tile and Melamine Primer. Please keep in mind that the Tile & Melamine Primer should be used as a primer before you apply any topcoat. It can only be used on Ceramic and Melamine.

It is not recommended for floors, kitchen work surfaces and glass mosaics. Allow the first coat to dry thoroughly, then sand lightly with a fine paper and wipe clean before applying the second coat.

Sand the primed surface lightly before application of the topcoat. Please see our Kitchens & Bathrooms Surface Preparation Guide for more info.< back to the top. Q: How do I paint a rusted galvanised Ibr sheet? A: You will have to abrade the metal back to a bright metal finish by means of mechanical grinding or by using a wire brush. Clean the entire area with GIC1 and allow to dry. Prime all bare and exposed areas with EMS 1.

Apply 2 coats of Plascon Nuroof Cool with 2 hours drying time at 2. A product that you can try is Remov. All High Performance Coatings Remover (RRH5. Try this on a small and inconspicuous area first and ensure that you are happy with the results before continuing.< back to the top. Q: I have terracotta floor tiling, which has been sealed with a polyurethane varnish. It’s in poor condition – flaking, stained and porous in some areas.

I can’t afford to replace the flooring at the moment and was hoping that I could paint it to give a new lease on life. Would Plascon Floor Paint work? A: Please note that none of our products are suitable for use on any floor tiles. Plascon Floor Paint is designed for use on concrete only.

What we can advise is that the existing coating will have to be removed in it’s entirety before application of any product. It would be good to know how long the existing coating has been on the tiles and if there is DPC (which is highly likely due to interior use) under the tiles.

Note that if there is any moisture the new coating will also lift and peel.< back to the top. Q: Can Plascon tester pots be mixed in any colour and how much do they retail for? Also, what is a tint- base exactly? A: Plascon tester pots can be mixed in most of the Inspired fan- deck colours, except ultra pastel (where the colorant shots are too small) and retail for R2. A tint- base is a factory manufactured base (pastel, deep & transparent) and contains no colorant.

The colorant is then added in- store to a calculated formula in order to achieve a specific colour as depicted in our Inspired colour fan- deck. Please see our Tester Pots page for more info on where they are available.< back to the top. Q: We have had new claddit ceilings fitted to our house. At present they are new and bare.

How would you suggest we go about painting? A: In days gone by, claddit was the term used for “asbestos” ceiling boards. The new term for these ceiling boards is “fibre cement boards” as they do not contain asbestos anymore.

Before painting, it is important to first determine the exact substrate of ceilings as there are many different types of cladding on the market today e.